To do a factory reset on your blinds, press the P1 button on the motor head for 14 seconds (4 jogs and 4 beeps)
To reprogram your blind you will then need to pair the motor again.
Ensure the remote control is unlocked.
Select the channel (number) you want the blind to be on the remote control
Then press the P1 button on the motor head for 2 seconds (1 jog and 1 beep) and then quickly plus the Stop button on the remote control (1 jog and 1 beep)
Move the blind to the desired bottom limit and press and hold the Down and Stop together until the blind beeps and jog once.
If the blind moves up when pressing the down button - press the Up and Down buttons at the same time until the blind jogs and beeps - this will have changed the direction.
Move the blind to the desired upper position and press the Up and Stop buttons together until the blind beeps and jogs.
Once you are happy with the limits - re lock the remote control.
If you require further assistance please call the Rollease Acmeda Support on 0800 002 363 or use the You Tube resources at www.youtube.com/c/RolleaseAcmeda
